Skip to main content
Stesso

Cut & Assemble Corner Brackets

0:37
7:38
35.3K views

At 0:37 in

Built-In Camping Grill with Cooler Cart

Watch on YouTube

What happens here

Using a circular saw, cut several 1x4 cedar boards into 16-inch long pieces. These pieces will form the corner supports of the cart. For each corner support, use a KREG Foreman pocket hole jig to drill multiple pocket holes along one edge. Apply wood glue to the edge, then attach it to another 16-inch piece at a 90-degree angle using 1-1/4 inch pocket hole screws, forming strong L-shaped brackets. Create at least four of these for the cooler compartment.

Goal: Construct strong L-shaped corner brackets for the cart's structure.

Tools and materials

  • 1-1/4 inch Pocket Hole Screws — Securing wood pieces through pocket holes
  • Circular Saw DeWalt — Cutting lumber to length
  • Clamps Akrib — Holding pieces together while glue dries and screws are driven
  • Cordless Drill DeWalt — Driving pocket hole screws
  • KREG Foreman Pocket Hole Jig KREG — Drilling pocket holes for joinery
  • Pencil — Marking cut lines
  • Tape Measure — Measuring cuts
  • Wood Glue — Strengthening joints between wood pieces
  • 1x4 Cedar Boards — Creating the L-shaped corner brackets

What they say

Hide

tendency to age well and withstand the outside natural elements kind of like any kind of fence wood and last you a lot longer I know she did me a little pricey but if you find a board that's damaged on one side put out the other you can usually ask for discount at the checkout and usually they'll accommodate that for you the general construction consists of corners that the rest of the panels would attach to so starting with the base I cut a bunch of the lumber into 16 inch long pieces and I pocket hold one of the boards and attached it with glue and pocket hole screws to the other board creating these Corner L brackets once I created in my four at sixteen inch so long I was ready to get started on the cooler part and attaching the panels to it once all the corners were

Auto-generated from the video audio.