stesso

Project

At each fixture and at the manifold, you will make your connections. Start by cutting the PEX pipe to the desired length with a PEX cutter, ensuring the cut is perfectly square and clean. Slide a copper crimp ring over the end of the pipe. Fully insert the barbed end of the PEX fitting (e.g., a drop-ear elbow for a shower head or an angle stop for a sink) into the pipe until it seats against the shoulder of the fitting. Position the copper crimp ring so it is 1/8 to 1/4 inch from the end of the pipe, covering the barbed section. Squeeze the handles of the PEX crimp tool completely to compress the ring. Finally, use a go/no-go gauge to verify the crimp's diameter; the 'go' slot should fit over the ring, but the 'no-go' slot should not.

You're viewing a step from: How to Replace Grey Polybutylene Pipe with PEX

Intermediate

40 hours

2/4 Inventory

This is a comprehensive, step-by-step guide for a whole-house repipe project, detailing the process of removing problematic grey polybutylene (PB) plumbing and replacing it with a modern, reliable PEX (cross-linked polyethylene) system. The instructions assume the use of a central PEX manifold and the crimp/clamp connection method, which is common for DIY and professional installations.

Based on content fromThink Reno· 15K subscribers

Frequently Asked Questions

Given the 40-hour estimate, is a whole-house PEX repipe truly an 'intermediate' DIY project, or should I hire a professional?

While labeled intermediate, this project demands significant time, precision, and adherence to plumbing codes. It's suitable for experienced DIYers comfortable with tools and problem-solving, but if you're unsure about the complexity or time commitment, consulting a licensed plumber is advisable, especially for main supply connections and final inspections.

What are the most crucial safety precautions I must take when replacing polybutylene pipes with PEX?

Always shut off and thoroughly drain the main water supply before starting. Wear appropriate PPE, including eye protection, and ensure good ventilation if soldering is required for main tie-ins. Be cautious when cutting into existing lines to prevent accidental damage or uncontrolled water release, and always have a plan for containing potential leaks.

The project lists specific PEX tools like crimp tools and cutters. Are these absolutely essential, or are there budget-friendly alternatives?

Yes, specialized PEX tools such as a PEX pipe cutter and a crimp/clamp tool are essential for making reliable, leak-free connections. While there are different brands and price points, investing in quality PEX-specific tools is crucial for successful installation. Avoid using standard tools for PEX connections, as they can lead to costly leaks and system failures.

What are common mistakes DIYers make during PEX installation, particularly with crimp connections, and how can they be avoided?

Common mistakes include improper crimp ring placement, not fully deburring cut pipes, and over-tightening manifold connections. Always ensure the crimp ring is correctly positioned over the fitting's barb, deburr all pipe ends to prevent leaks, and follow manufacturer guidelines for manifold valve torque. Testing sections of the system as you go can help catch issues early.