Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 5 · Install Molding with Adhesive

Carefully position the cove molding pieces onto the stair nosings, pressing them firmly into place. Apply even pressure along the entire length of the molding to ensure good contact with the stair nosing and to activate the adhesive. Hold each piece in place for a few seconds, or as recommended by the adhesive manufacturer, to allow it to grab.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Install Molding with Adhesive

Carefully position the cove molding pieces onto the stair nosings, pressing them firmly into place. Apply even pressure along the entire length of the molding to ensure good contact with the stair nosing and to activate the adhesive. Hold each piece in place for a few seconds, or as recommended by the adhesive manufacturer, to allow it to grab.

Videos for this step

Install Straight Cove Base SectionInstall Stair Nosing MoldingInstall Cove Molding

Tools and Materials

← Project

How to Install Cove Molding Under Stair Nosings

Step 5 of 8·1.2 hr left

Measure and Mark Molding for Cuts
15 minutes3 items
Cut Cove Molding
20 minutes4 items
Dry Fit the Molding
10 minutes1 items
Apply Adhesive
5 minutes2 items
5
Install Molding with Adhesive
10 minutes3 items
6
Secure Molding with Fasteners (Optional)
15 minutes4 items
7
Fill Nail Holes and Caulk Gaps
15 minutes6 items
8
Clean and Paint/Stain
30 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.