Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 4 · Apply Adhesive

Once you have confirmed a perfect fit, remove the molding pieces. Apply a consistent bead of high-quality construction adhesive along the back of each piece of cove molding. Apply the adhesive about 1/8 inch in from the edges to prevent excessive squeeze-out. For longer pieces, apply adhesive in a serpentine or zig-zag pattern to ensure even coverage and a strong bond.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Apply Adhesive

Once you have confirmed a perfect fit, remove the molding pieces. Apply a consistent bead of high-quality construction adhesive along the back of each piece of cove molding. Apply the adhesive about 1/8 inch in from the edges to prevent excessive squeeze-out. For longer pieces, apply adhesive in a serpentine or zig-zag pattern to ensure even coverage and a strong bond.

Videos for this step

Apply Adhesive to MoldingApply Adhesive to New Cove BasePrepare Wall and Apply Adhesive

Tools and Materials

← Project

How to Install Cove Molding Under Stair Nosings

Step 4 of 8·1.3 hr left

Measure and Mark Molding for Cuts
15 minutes3 items
Cut Cove Molding
20 minutes4 items
Dry Fit the Molding
10 minutes1 items
4
Apply Adhesive
5 minutes2 items
5
Install Molding with Adhesive
10 minutes3 items
6
Secure Molding with Fasteners (Optional)
15 minutes4 items
7
Fill Nail Holes and Caulk Gaps
15 minutes6 items
8
Clean and Paint/Stain
30 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.