Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 8 · Clean and Paint/Stain

Once all filler and caulk have dried, thoroughly clean the installed molding and the surrounding stair nosing area to remove any dust or debris. If your molding is unfinished, now is the time to paint or stain it to match your desired aesthetic. Apply your chosen finish according to the product manufacturer's instructions. Multiple thin coats are usually better than one thick coat. Allow ample drying time between coats.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Clean and Paint/Stain

Once all filler and caulk have dried, thoroughly clean the installed molding and the surrounding stair nosing area to remove any dust or debris. If your molding is unfinished, now is the time to paint or stain it to match your desired aesthetic. Apply your chosen finish according to the product manufacturer's instructions. Multiple thin coats are usually better than one thick coat. Allow ample drying time between coats.

Videos for this step

Final Touches: Fill, Sand, Paint, and CoverPaint for a Finished LookCaulk, Fill, Sand, and Paint for a Seamless Finish

Tools and Materials

← Project

How to Install Cove Molding Under Stair Nosings

Step 8 of 8·30 min left

Measure and Mark Molding for Cuts
15 minutes3 items
Cut Cove Molding
20 minutes4 items
Dry Fit the Molding
10 minutes1 items
Apply Adhesive
5 minutes2 items
Install Molding with Adhesive
10 minutes3 items
Secure Molding with Fasteners (Optional)
15 minutes4 items
Fill Nail Holes and Caulk Gaps
15 minutes6 items
8
Clean and Paint/Stain
30 minutes4 items
PrevNext
TermsPrivacySafetyLegal© 2026 Stesso, Inc.