Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 6 · Secure Molding with Fasteners (Optional)

For added durability, especially in high-traffic areas, you can reinforce the adhesive bond with small finish nails or brad nails. Using a brad nailer or a hammer, carefully drive 1-inch or 1 1/4-inch nails through the molding and into the stair nosing. Space the nails approximately every 12 to 18 inches, and ensure they are driven straight to avoid splitting the wood. Sink the nail heads slightly below the surface with a nail set.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Secure Molding with Fasteners (Optional)

For added durability, especially in high-traffic areas, you can reinforce the adhesive bond with small finish nails or brad nails. Using a brad nailer or a hammer, carefully drive 1-inch or 1 1/4-inch nails through the molding and into the stair nosing. Space the nails approximately every 12 to 18 inches, and ensure they are driven straight to avoid splitting the wood. Sink the nail heads slightly below the surface with a nail set.

Videos for this step

Secure and Finish NosingSecure Molding with Mechanical FastenersGlue and Secure Nosing

Tools and Materials

← Project

How to Install Cove Molding Under Stair Nosings

Step 6 of 8·1 hr left

Measure and Mark Molding for Cuts
15 minutes3 items
Cut Cove Molding
20 minutes4 items
Dry Fit the Molding
10 minutes1 items
Apply Adhesive
5 minutes2 items
Install Molding with Adhesive
10 minutes3 items
6
Secure Molding with Fasteners (Optional)
15 minutes4 items
7
Fill Nail Holes and Caulk Gaps
15 minutes6 items
8
Clean and Paint/Stain
30 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.