Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 3 · Dry Fit the Molding

Before applying any adhesive or fasteners, place the cut pieces of cove molding into their intended positions along the stair nosings. Check that each piece fits snugly and that the angles at the corners or joints align correctly. Look for any gaps or areas that do not meet flush. This is the crucial stage to make any necessary adjustments to your cuts.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Dry Fit the Molding

Before applying any adhesive or fasteners, place the cut pieces of cove molding into their intended positions along the stair nosings. Check that each piece fits snugly and that the angles at the corners or joints align correctly. Look for any gaps or areas that do not meet flush. This is the crucial stage to make any necessary adjustments to your cuts.

Videos for this step

Install Cove MoldingDry Fit Tread and NosingTest Fit Cut Molding

Tools and Materials

← Project

How to Install Cove Molding Under Stair Nosings

Step 3 of 8·1.4 hr left

Measure and Mark Molding for Cuts
15 minutes3 items
Cut Cove Molding
20 minutes4 items
3
Dry Fit the Molding
10 minutes1 items
4
Apply Adhesive
5 minutes2 items
5
Install Molding with Adhesive
10 minutes3 items
6
Secure Molding with Fasteners (Optional)
15 minutes4 items
7
Fill Nail Holes and Caulk Gaps
15 minutes6 items
8
Clean and Paint/Stain
30 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.