Skip to main content

Prepare Wall and Apply Adhesive — Apply Adhesive

Beginner6 hours

Part of project

How to Install Cove Molding Under Stair Nosings · Step 4 of 8

Helpful?

In this video

Prior to applying the coving, ensure the wall and ceiling surfaces where it will be installed are clean and free of any debris or loose materials. If there is wallpaper, carefully remove it from the strip where the coving will sit. Once the surface is prepared, apply a steady, continuous bead of construction adhesive (caulk) to the back edges of the coving piece that will make contact with the wall and ceiling. Ensure even coverage to secure the coving firmly.

49.3K views3.9K
Transcript
Hide

explains it now just like kind of like at this right before I adhere the piece to the wall I will remove the trim of wallpaper at the Top If you get a bit confused like me look at a piece of furniture that has an external corner on it or even a skirting board but angles they give me you know what they're sort of mathematical equations that would make me cry in skill my brain just my it just cannot I just cut aide pie on for a minute I was like oh no but so this is that corner this is that corner we have a corner fingers crossed and now just need to C the other side Mark out the wallpaper and remove the wallpaper from the top where this is going and pray I don't like when I cut the styrofoam it like leaves my hand itchy or something hopefully that's hopefully there's not a lot of chemicals in it anyway uh don't break that okay I'm going to put the second piece so now it's time to fit it and fill it so I'm going to pop a eive on the back stick it up onto the wall once it's dry I will then use some to make it look professional and hidey Annie dodgy edges two weeks ago I have a video where I did the whole room and this was the last section that I needed to figure out and do so I will spare you all of me going

Auto-generated transcript. May contain errors.