Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 5 · Set First Row of Pavers

Place the first paver onto the sand bed, pressing it down gently. Use a rubber mallet to tap it into place, ensuring it is flush with the retaining edge (if used) and level. Continue laying pavers for the first row, maintaining consistent joint widths (typically 1/8 to 1/4 inch). Check for levelness across multiple pavers and along the row.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Set First Row of Pavers

Place the first paver onto the sand bed, pressing it down gently. Use a rubber mallet to tap it into place, ensuring it is flush with the retaining edge (if used) and level. Continue laying pavers for the first row, maintaining consistent joint widths (typically 1/8 to 1/4 inch). Check for levelness across multiple pavers and along the row.

Videos for this step

Lay the First Row of PaversPlace and Set PaverLay Pavers

Tools and Materials

← Project

How to Build Paver Steps into a Hill

Step 5 of 11·13 hr left

Excavate for Step Base
120 minutes5 items
Install Retaining Edge (Optional but Recommended)
90 minutes4 items
Add and Compact Paver Base
180 minutes4 items
Lay Sand Setting Bed
60 minutes3 items
5
Set First Row of Pavers
90 minutes5 items
6
Lay Subsequent Rows of Pavers
240 minutes4 items
7
Cut Pavers for Edges and Risers
120 minutes6 items
8
Install Risers and Treads
180 minutes5 items
9
Sweep Joint Sand
60 minutes3 items
10
Compact Paver Surface
60 minutes2 items
11
Final Joint Sand Application and Cleaning
30 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.