Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 11 · Final Joint Sand Application and Cleaning

After compacting, sweep away any loose excess sand from the paver surface. If you used polymeric sand, you may need to lightly mist the surface with water according to the manufacturer's instructions to cure the sand. Clean the surrounding area of any debris.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 11 · Final Joint Sand Application and Cleaning

After compacting, sweep away any loose excess sand from the paver surface. If you used polymeric sand, you may need to lightly mist the surface with water according to the manufacturer's instructions to cure the sand. Clean the surrounding area of any debris.

Videos for this step

Activate Polymeric SandSweep in Polymeric SandFinalize Paver Surface and Joints

Tools and Materials

← Project

How to Build Paver Steps into a Hill

Step 11 of 11·30 min left

Excavate for Step Base
120 minutes5 items
Install Retaining Edge (Optional but Recommended)
90 minutes4 items
Add and Compact Paver Base
180 minutes4 items
Lay Sand Setting Bed
60 minutes3 items
Set First Row of Pavers
90 minutes5 items
Lay Subsequent Rows of Pavers
240 minutes4 items
Cut Pavers for Edges and Risers
120 minutes6 items
Install Risers and Treads
180 minutes5 items
Sweep Joint Sand
60 minutes3 items
Compact Paver Surface
60 minutes2 items
11
Final Joint Sand Application and Cleaning
30 minutes3 items
PrevNext
TermsPrivacySafetyLegal© 2026 Stesso, Inc.