Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 3 · Add and Compact Paver Base

Add a layer of coarse gravel (e.g., crushed stone or paver base material) to the excavation. Spread it evenly to a depth of 4-6 inches. Compact the gravel thoroughly using a hand tamper or a plate compactor. Repeat in 2-3 inch layers until the desired base depth is reached and it is firm and level, slightly below the final paver height.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Add and Compact Paver Base

Add a layer of coarse gravel (e.g., crushed stone or paver base material) to the excavation. Spread it evenly to a depth of 4-6 inches. Compact the gravel thoroughly using a hand tamper or a plate compactor. Repeat in 2-3 inch layers until the desired base depth is reached and it is firm and level, slightly below the final paver height.

Videos for this step

Build the Gravel BaseInstall Paver Base and Initial CompactionCompact the Gravel Base

Tools and Materials

← Project

How to Build Paver Steps into a Hill

Step 3 of 11·17 hr left

Excavate for Step Base
120 minutes5 items
Install Retaining Edge (Optional but Recommended)
90 minutes4 items
3
Add and Compact Paver Base
180 minutes4 items
4
Lay Sand Setting Bed
60 minutes3 items
5
Set First Row of Pavers
90 minutes5 items
6
Lay Subsequent Rows of Pavers
240 minutes4 items
7
Cut Pavers for Edges and Risers
120 minutes6 items
8
Install Risers and Treads
180 minutes5 items
9
Sweep Joint Sand
60 minutes3 items
10
Compact Paver Surface
60 minutes2 items
11
Final Joint Sand Application and Cleaning
30 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.