Check Engine Oil Level

What happens here

After adding the new engine oil, start the tractor and let it run for a few minutes to circulate the new oil and fill the filter. Then, shut off the engine and wait for a few minutes to allow the oil to drain back into the oil pan. Locate the engine oil dipstick, pull it out, wipe it clean with a rag, and reinsert it fully. Pull the dipstick out again and check the oil level. It should be between the 'add' and 'full' marks. If it's low, add small amounts of oil as needed and recheck until the level is correct.

Goal: Verify the engine oil is at the correct level.