Skip to main content

Install Bottom Ledger Boards

0:05
1:22
10.6K views

At 0:05 in

Storage shelf!

What happens here

Measure 20 inches up from the ground to mark the position for the lowest shelf. Using a cordless drill, securely fasten the first ledger board (a horizontal piece of lumber) to the wall at this marked height. During installation, use a spirit level to ensure the board is perfectly horizontal, allowing for even shelves. Repeat this process for the ledger board on the adjacent wall, ensuring it aligns with the first.

Goal: Secure the initial horizontal supports for the lowest shelf.

Tools and materials

  • Cordless Drill Milwaukee — Driving screws to secure the lumber
  • Measuring Tape — Measuring the shelf height from the ground
  • Spirit Level Pittsburgh — Ensuring the ledger boards are perfectly horizontal
  • Lumber — Creating the horizontal support for the shelves
  • Pencil — Marking measurements
  • Wood Screws — Securing the lumber to the wall

What they say

Hide

I got truck parts absolutely everywhere, so I need to build a shelf in this corner. Let's get after it. So, I'm doing a ledger style shelf. I set my first shelf at 20 in off the ground, and I'm just going to go ahead and put a screw in here. That's level right there. I'm going to screw this up. All right, so now that we got the back one on, we're going to go ahead and throw our side one on here. All right, so I cut these spacer blocks, so now all of my shelves will be the same distance all the way up. So, I'm just going to put the spacer blocks on there.

Auto-generated from the video audio.