Skip to main content

Complete Shelf Framing with Vertical and Front Supports

0:37
1:22
10.6K views

At 0:37 in

Storage shelf!

What happens here

Install vertical lumber posts at the front edge of the shelving unit. These posts will provide structural support for the front of the shelves. Connect these vertical posts to the wall-mounted ledger boards using additional horizontal lumber pieces. These horizontal pieces will run from the wall ledgers to the front vertical posts, forming the complete box-like frame for each shelf level. Ensure all connections are strong and the entire frame is stable.

Goal: Build the full structural frame for the shelving unit.

Tools and materials

  • Cordless Drill Milwaukee — Driving screws to secure the lumber
  • Measuring Tape — Measuring lumber lengths
  • Saw — Cutting lumber for vertical and front horizontal supports
  • Lumber — Connecting vertical posts to wall ledgers and forming the front edge of shelves
  • Wood Screws — Securing all lumber pieces together

What they say

Hide

that it's level. Perfectly level. We'll do two more shelves going up, then we put our plywood on. Next step is is to run a board from here to here on all of them, and then to run a board from here to here on all of them, and then we'll put our half-inch plywood down, and the shelf will be done. All right, I got the bottom two shelves tied into this corner here. I'm going to finish the last two, and then we're going to sheet it with plywood. All right, this is not going anywhere. I'm going to go ahead and drop my plywood on top of here, and then uh

Auto-generated from the video audio.