Skip to main content

Install Additional Ledger Boards with Spacer Blocks

0:14
1:22
10.6K views

At 0:14 in

Storage shelf!

What happens here

After installing the bottom ledger boards, cut several spacer blocks from lumber to the desired height difference between shelves. These blocks will be used to maintain consistent spacing for subsequent ledger boards. Position a spacer block on top of the installed ledger, place the next ledger on top of the spacer, and then secure it to the wall with screws using the cordless drill. Check for level after each ledger board installation. Repeat this process for all desired shelf heights, installing both back and side ledger boards for each level.

Goal: Create a consistent and level framework for multiple shelves.

Tools and materials

  • Cordless Drill Milwaukee — Driving screws to secure the lumber
  • Measuring Tape — Measuring spacer block height
  • Saw — Cutting lumber for spacer blocks and ledger boards
  • Spirit Level Pittsburgh — Ensuring the ledger boards are perfectly horizontal
  • Lumber — Creating additional horizontal supports for shelves
  • Spacer Blocks — Ensuring consistent height between shelves
  • Wood Screws — Securing the lumber to the wall

What they say

Hide

That's level right there. I'm going to screw this up. All right, so now that we got the back one on, we're going to go ahead and throw our side one on here. All right, so I cut these spacer blocks, so now all of my shelves will be the same distance all the way up. So, I'm just going to put the spacer blocks on there. Drop my second shelf ledger. And then all I got to do is make sure that it's level. Perfectly level. We'll do two more shelves going up, then we put our plywood on. Next step is is to run a board from here to here on all of them,

Auto-generated from the video audio.