Skip to main content
Stesso

Prepare the Texture Spray Can

1:39
5:06
303.4K views

At 1:39 in

Patching a Hole in a Wall and Using Spray Texture. Tips Using Homax spray texture.

Watch on YouTube

What happens here

For optimal results, ensure the spray texture can is at room temperature. If the can has been stored in a cold environment, such as a garage, it will not spray effectively. A convenient way to warm it up is to run a sink full of hot water and let the can sit in it for a few minutes. Before applying to the wall, it's highly recommended to practice spraying on a piece of cardboard to get a feel for the spray pattern and application technique.

Goal: Ensure the spray can is ready for optimal application

Tools and materials

  • Cardboard N/A — For practicing the spray technique
  • Homax Wall Texture Homax — The main product being prepared
  • Sink N/A — To warm the spray can with hot water
  • Hot Water N/A — To warm up a cold spray can

What they say

Hide

temperature, they don't spray very well. So if it's been sitting outside in a garage or if it's really cold, a convenient way to heat up the can is just uh run a sink full of hot water, set the can in hot water, let it set there, and warm up. And the warmer the can is, the easier it comes out and sprays. And so we've got a c a can of texture. It's at room temperature now and it sprays really well. And if you're unfamiliar with spraying these cans, it's really good to practice with them first. Take a piece of cardboard and spray it on a piece of cardboard. Prior to spraying, I always get myself a 5gallon bucket. I'm going to test my spray can by spray it in a five gallon

Auto-generated from the video audio.