Dry and Refine the Applied Texture

4:13

5:06

303.4K views

At 4:13 in

Patching a Hole in a Wall and Using Spray Texture. Tips Using Homax spray texture.

Watch on YouTube

What happens here

After applying the texture, allow it to dry completely, which typically takes about 5 minutes for an oil-based product. Once dry, carefully inspect the textured area. If the pattern appears slightly too flat or if there are any small, heavy peaks of texture, take a sanding sponge and very lightly rub it over these areas. The goal is to gently knock down any sharp points or overly dense texture to achieve a smooth blend that seamlessly matches the surrounding wall. Be gentle to avoid removing too much texture.

Goal: Smooth and blend the applied texture for a seamless finish

Tools and materials

Sanding Sponge N/A — Lightly smoothing any high spots or rough edges on the dried texture

What they say

(699 characters)

Hide

any heavy little spots on it. And then it's ready to paint. And that's how you spray texture a wall, a patch in a wall. So, it's been about 5 minutes now. Our spray texture is dry. And we've just got a sanding sponge right here. And we're just going to There's just a few little um sharp points and stuff on that. So, we're just going to take our sanding sponge and just lightly rub it over it just to knock down any of the little heavy spots. And it looks flat. Looks like the texture on the wall, it's blended in, faded out nicely. So, you won't see um the patch very well at all. And now that I'm all done, I don't I don't need my can anymore. This can, if you don't get rid of the texture inside

Auto-generated from the video audio.