Skip to main content
Stesso

Clean and Store the Spray Can

4:53
5:06
303.4K views

At 4:53 in

Patching a Hole in a Wall and Using Spray Texture. Tips Using Homax spray texture.

Watch on YouTube

What happens here

Once the texturing project is complete, it's important to properly clean the spray can for future use. If the texture inside the nozzle tube is not cleared, it will dry and ruin the can, making it unusable. To prevent this, turn the spray can upside down. Press the nozzle and spray into a 5-gallon bucket or trash can until only air comes out of the can. This indicates that the internal tube is clear of texture, and the can is ready to be stored.

Goal: Clear the nozzle and prepare the spray can for storage

Tools and materials

  • 5-gallon Bucket N/A — As a safe target for spraying out residual texture
  • Homax Wall Texture Homax — The can being cleaned

What they say

Hide

won't see um the patch very well at all. And now that I'm all done, I don't I don't need my can anymore. This can, if you don't get rid of the texture inside the tube, it's going to ruin the can. So, you always want to turn it upside down and spray it till air comes out of the can. And once air comes out of the can, it's good to go. Put it away from

Auto-generated from the video audio.