Skip to main content

Cutting Drywall with a Straight Edge

0:21
1:48
29.3K views

At 0:21 in

Mark and cut drywall

What happens here

If you don't have a drywall T-square, you can still make a straight cut. First, use a tape measure and pencil to mark the desired cut length at both the top and bottom edges of the drywall. For example, mark 70 inches at the top and 70 inches at the bottom. Once you have both marks, position a long straight edge, such as a level, to connect these two points. Hold the straight edge firmly against the drywall and score along its length with a utility knife, just cutting through the paper face.

Goal: Make a straight cut using measurements and a straight edge

Tools and materials

  • Level — Acting as a straight edge to guide the knife
  • Pencil — Marking the cut points
  • Tape Measure — Measuring the desired length
  • Utility Knife — Scoring the drywall
  • Drywall — The material being cut

What they say

Hide

score the paper. And there you have it. Now, it's cut. All right, so what if you don't have a T-square? This case, let's just do 70. I'll go to the down to the bottom and mark at 70 again. Once you got the two measurements marked, you can go ahead and take up whatever you have. I don't really care as long as it's straight. Take your knife and again, the same thing. You can just run it. Now, what if you got to cut horizontally? Go ahead and take your tape measure and say we

Auto-generated from the video audio.