Skip to main content

Cutting Drywall with a Chalk Line

0:40
1:48
29.3K views

At 0:40 in

Mark and cut drywall

What happens here

For horizontal cuts, especially long ones, a chalk line is an effective tool. Start by using a tape measure and pencil to mark the desired height at both ends of the drywall sheet. Hook the chalk line's metal end onto one mark, pull the line taut across to the other mark, ensuring it aligns perfectly. Then, lift the chalk line straight up from the drywall and let it snap back down to create a clear, straight chalk mark. Follow this chalk line by scoring the drywall's paper face with a utility knife.

Goal: Make a horizontal cut using a chalk line

Tools and materials

  • Chalk Line — Creating a straight line across the drywall
  • Pencil — Marking the cut points
  • Tape Measure — Measuring the desired height for the cut
  • Utility Knife — Scoring along the chalk line
  • Drywall — The material being cut

What they say

Hide

Take your knife and again, the same thing. You can just run it. Now, what if you got to cut horizontally? Go ahead and take your tape measure and say we got to cut 5 in. You can take a chalk line. Hook your chalk line on the end, put it right to your mark here and just snap a line like that. And now, you could freehand this. If you guys are going to be doing a lot of drywall, you should probably learn how to do the knife and the tape measure trick and

Auto-generated from the video audio.