Skip to main content

Breaking and Finishing the Drywall Cut

1:19
1:48
29.3K views

At 1:19 in

Mark and cut drywall

What happens here

After scoring the drywall using any of the methods, the next step is to break the sheet. Pull the scored drywall away from the wall so that the scored line is unsupported. Place one hand (or foot) on one side of the scored line and apply pressure to the other side, causing the drywall to snap along the score. The paper backing on the opposite side will usually remain intact. Once broken, flip the drywall over and use your utility knife to cut through the remaining paper backing, ensuring a clean and complete separation of the two pieces.

Goal: Separate the cut drywall pieces cleanly

Tools and materials

  • Utility Knife — Cutting the remaining paper backing after breaking
  • Scored Drywall — The drywall that has been scored and needs to be broken

What they say

Hide

Now, we got to break it. Pull your drywall off the wall like this, put your hand here and just punch in or kick it. It's going to break just like that. Now, come on the back side here and run your knife up the back side. And now, if you can't reach all the way to the bottom, you can come down to the bottom here and you can score through the front side. And just like that, you got a clean cut. Anyways, I got drywall to hang. I'll catch you guys later. Peace.

Auto-generated from the video audio.