Skip to main content

Secure Engine Mounts and Bellhousing

3:19
21:32
28.1K views

At 3:19 in

LSXcalade Rebuild: Dart Block 427 Goes In & Custom Accessories Explained!

What happens here

With the engine positioned, carefully align the motor mounts and bellhousing. Access the lower bellhousing bolts from underneath the vehicle to start them by hand. Once the bolts are started, use a wrench or impact driver to tighten them, ensuring the engine is properly aligned and secured. Be especially mindful of the witness marks on the motor mount washers to ensure correct alignment.

Goal: Fasten the engine to the vehicle and transmission

Tools and materials

  • Engine Hoist — To allow slight adjustments during alignment
  • Impact Driver Milwaukee — Tightening bolts
  • Wrenches — Accessing and tightening bolts in tight spaces

What they say

Hide

you're welcome thanks was it in there and you took it out no it was never in there oh it looked like it was it's really hard to see it's different when i've done this before and had it hanging from the ceiling you can like stand in there and you know kind of get it well now it's like stuck crooked on something i don't even know who franny is sort of i hate this i hate it so much she's going in to get it done now you see this very bottom one right there is it they're in the same places that we did them on the monte carlo there's a spider under here spider web oh there's a spider in it babe that dead one crusty falling in my mouth that's pretty good finger tight i'm about to fart rip it oh i don't know did you hear that yeah oh could they hear it leave it leave a comment if you heard it also leave a comment yeah i'm playing a camera i'm talking right now does anybody else fart on camera and then ask you about it i think that's worth you know a share you should like tell your friends you better subscribe to these people because they fart and then laugh about it we just don't care does your girlfriend send you pictures of her poop only if they're impressive though which has happened a couple days in a row now people think i'm disgusting now no they don't care and we don't both my best friend yeah and it's funny that's what we do if your girlfriend doesn't feel the need to show you like a legendary turd then you're probably just like not gonna work so i hate to tell you well we got all the engine bell housing bolts started in good and tightening up the motor mount bolts now being conscious of where it lands with the witness marks on the washer is because if it's not in the exact same place then the pipes don't line up because everything is hard it's like solid mounted so yeah if those bolts don't line up perfectly with the marks in the paint then we'll have to adjust the engine a little bit maybe once they all tighten down it'll kind of settle and be in the right spot because i've never never had to mess with it before it always just kind of worked out starting to get stuff cleaned

Auto-generated from the video audio.