Mark Location for Support on Bearing Wall

What happens here

To accurately locate the support, first plumb down from the fascia of the roof structure using a level. Measure the distance from the plumb line back to the existing stud or framing. Transfer this measurement onto the roof decking, and then add half the width of your stud to this measurement to find the true center of the bearing wall. Mark this precise center point by striking a nail into the wood. The presenter also briefly notes that if the exterior wall has vinyl or brick, the thickness of these materials must be added to the measurement to reach the stud's center.

Goal: Accurately locate and mark the center of the load-bearing structure for the support system.