Skip to main content
Stesso

Install Stair Unit and Address Electrical Obstructions

8:15
28:14
4.9M views

At 8:15 in

I Built My Daughter A Dream Bunk Bed

Watch on YouTube

What happens here

Temporarily place the assembled stair unit into its intended position. Identify any obstructions, such as electrical outlets. In this case, an outlet was directly behind the stairs. To maintain safety and access, disconnect the existing outlet and convert it into a junction box. Cover the junction box securely. This ensures that the electrical wires are safely terminated and not accidentally accessible or damaged behind the stairs. With the electrical issue resolved, slide the stair unit into place and secure it to the adjacent bed frame and wall using screws.

Goal: Safely install the stair unit, managing any electrical obstructions.

Tools and materials

  • Cordless Drill Ryobi — Driving screws to secure the stair unit
  • Junction Box Cover Plate — Covering the converted junction box
  • Oscillating Multi-tool Ryobi — Carefully removing parts of existing trim if needed for fit
  • Screwdriver — Disconnecting and reconnecting electrical components
  • Stair Unit N/A — The pre-assembled stair unit to be installed
  • Wire Nuts — Capping and securing electrical connections in the junction box
  • Wire Strippers — Stripping wire insulation
  • Wood Screws — Securing the stair unit to the bed frame and wall

What they say

Hide

there and uh this is basically one giant cabin here's our next hurdle stairs are going in here the second step is going to be blocking this electrical box we can't have that we have two options we can either move it up here which you're like why do you need an outlet on the stairs you don't we have an outlet here we'll make something cool out of it so the only thing I'm going to do to make sure it's safe is uh take this receptacle off and turn into a dunum box cover it up cover up the wires and then we can slide this thing in here boy this is not going to be easy for me is it so the lower uh trip piece right here the 1X two is sticking out I need to clear about an extra half an inch I'm might have to do this a hard way maybe lift it up clear that and slide it in and uh in the process not break my back which if we captur it on YouTube that'd be cool stupid trim piece okay think think [Music] think all right I think we got it positioned exactly how we want it let's start screw some holes in through the side here make sure it doesn't move and

Auto-generated from the video audio.