Skip to main content
Stesso

Install Bed Slats & Mattresses

14:53
18:58
1.5M views

At 14:53 in

I Built A Gaming Bunk Bed For My Kids

Watch on YouTube

What happens here

Cut 1x4 common wood pieces to length to serve as bed slats. Screw these slats onto the horizontal supports of both the upper and lower bunk frames, spacing them evenly. This creates a sturdy base for the mattresses. Once the slats are in place, lift and position the mattresses into each bunk. The top mattress can be placed by lifting it into the upper bunk opening.

Goal: Securely attach 1x4 common wood slats to the bed frames and place mattresses in both bunks, completing the sleeping areas.

Tools and materials

  • Cordless Drill
  • Wood Screws
  • 1x4 Common Wood
  • Twin Mattresses

What they say

Hide

all right so the mattress cleats these are the 1x4 common wood which is the cheapest kind of wood you can find i bought 13 pieces that are 10 foot long that was able to cover both cost me roughly around 110 bucks you can use plywood which actually has a little more flex to it and durability but it'll probably end up saving you an extra 10. so you can do either or [Music] this guy's good should go subscribe to his channel [Music] it works

Auto-generated from the video audio.