Skip to main content
Stesso

Assemble Horizontal Bed Supports

2:31
18:58
1.5M views

At 2:31 in

I Built A Gaming Bunk Bed For My Kids

Watch on YouTube

What happens here

In the garage, take the pre-cut 2x6 lumber pieces that will serve as the horizontal supports for the mattresses. Using a pocket hole jig and a cordless drill, create pocket holes at each end of these boards. These holes will allow for strong, concealed screw connections to the vertical posts in the room, forming the main bed frames.

Goal: Prepare the horizontal 2x6 supports for the mattresses by drilling pocket holes at their ends, ensuring strong and concealed connections to the vertical posts.

Tools and materials

  • Clamps
  • Cordless Drill
  • Pocket Hole Jig

What they say

Hide

that we're using uh i got 75 inch for the front or the sides and then the 34 inch plus a couple other inches that's going to be part of the post is going to be for the head and footer here's how we're going to assemble them we're going to put pocket holes on ends and then secure with wood glue into the sides of the post and then obviously the back part is going to go into the drywall now you probably saw what i got cut here these are going to go just for

Auto-generated from the video audio.