Skip to main content

Prepare the Miter Saw for Inspection

0:04
1:19
44.7K views

At 0:04 in

How to calibrate your miter saw

What happens here

Before beginning any adjustments or checks, always ensure the miter saw is unplugged from its power source for safety. Next, verify that the miter saw's angle setting is precisely at 0 degrees, as indicated by the scale and pointer. Once set, securely lock the saw in this 0-degree position.

Goal: Set up the miter saw in a safe and standardized position for checking squareness.

Tools and materials

  • Miter Saw Ridgid — The primary tool being inspected and calibrated

What they say

Hide

Your miter saw says 0° but is it actually cutting square? Let's get after it. Unplug your saw. Make sure your saw is set to 0, lock in place. Get yourself a good square, up against your fence and on your blade. And as you can see, I have a gap along this back edge. Get yourself a piece of wood and we'll make a cut. Once we have this, you can go ahead and take this side and flip it over. Press your bottoms tight and as you can tell, we have a gap. Next, we want to check

Auto-generated from the video audio.