Skip to main content

Perform Miter Cut Test

0:15
1:19
44.7K views

At 0:15 in

How to calibrate your miter saw

What happens here

To confirm the miter squareness with a practical test, place a piece of scrap wood on the saw table and make a crosscut. Ensure the saw is plugged back in for this step, but exercise extreme caution. Once the cut is made, unplug the saw again. Take the two cut pieces of wood. Flip one piece over so that its cut edge is against the cut edge of the other piece. Bring the bottom edges of both pieces tightly together. If there is a gap along the top edges where the two pieces meet, the miter saw is not cutting perfectly square.

Goal: Verify miter squareness by making a test cut and inspecting the resulting pieces.

Tools and materials

  • Ear Protection — Protecting ears from loud noise during operation
  • Eye Protection — Protecting eyes from sawdust and debris during operation
  • Miter Saw Ridgid — Making the test cut
  • Scrap Wood — To make a test cut for checking squareness

What they say

Hide

set to 0, lock in place. Get yourself a good square, up against your fence and on your blade. And as you can see, I have a gap along this back edge. Get yourself a piece of wood and we'll make a cut. Once we have this, you can go ahead and take this side and flip it over. Press your bottoms tight and as you can tell, we have a gap. Next, we want to check our bevel. Grab yourself a smaller square, lay it on your table, slide it up against your blade. As you can see, there are no gaps. Whether it's

Auto-generated from the video audio.