Skip to main content

Check Miter Squareness (Blade to Fence)

0:09
1:19
44.7K views

At 0:09 in

How to calibrate your miter saw

What happens here

To check the miter (crosscut) squareness, lower the saw blade without powering it on. Place a speed square firmly against the miter saw's fence and slide it towards the saw blade until it contacts the blade's flat side. Visually inspect for any gaps between the speed square and both the fence and the blade. A gap indicates that the blade is not perfectly perpendicular to the fence.

Goal: Verify the saw blade is 90 degrees to the fence at the 0-degree miter setting.

Tools and materials

  • Miter Saw Ridgid — The saw being checked
  • Speed Square Johnson Level & Tool — Measuring tool to check for 90-degree angles

What they say

Hide

Your miter saw says 0° but is it actually cutting square? Let's get after it. Unplug your saw. Make sure your saw is set to 0, lock in place. Get yourself a good square, up against your fence and on your blade. And as you can see, I have a gap along this back edge. Get yourself a piece of wood and we'll make a cut. Once we have this, you can go ahead and take this side and flip it over. Press your bottoms tight and as you can tell, we have a gap. Next, we want to check

Auto-generated from the video audio.