Skip to main content

Calibrate and Re-test (if necessary)

0:34
1:19
44.7K views

At 0:34 in

How to calibrate your miter saw

What happens here

If any of the previous tests (miter squareness or bevel squareness) revealed an issue, your miter saw needs calibration. The method for adjusting a miter saw varies by model and manufacturer. The video creator demonstrates loosening five Allen bolts on his particular saw's miter plate to allow for adjustment. Refer to your miter saw's user manual to find the specific adjustment points and procedures for your model. Once adjustments are made, repeat the squareness checks and cut test to confirm proper calibration. After achieving the desired squareness, tighten all loosened bolts securely.

Goal: Adjust the miter saw to achieve precise 90-degree miter and bevel cuts.

Tools and materials

  • Allen Wrench — Loosening and tightening adjustment bolts (specific to the video's saw)
  • Miter Saw Ridgid — The saw being calibrated
  • Small Square — Re-checking bevel squareness
  • Speed Square Johnson Level & Tool — Re-checking miter squareness
  • Scrap Wood — To perform additional cut tests after adjustment

What they say

Hide

can see, there are no gaps. Whether it's a square or the board, if any of those tests fail, you know that your saw needs to be calibrated. Every saw adjusts differently, so check your user manual to figure out how to adjust your saw. In my case, I just move this plate. I'm going to start by loosening these five Allen bolts. Now, when I got my saw locked in zero, you can see that this whole plate moves. So then we're going to go through the same test. Once you have it where you want it, tighten down all your screws. We can do the cut test again. If I flip this board over, there should be perfect all the way up. My

Auto-generated from the video audio.