Skip to main content

Check Bevel Squareness

0:25
1:19
44.7K views

At 0:25 in

How to calibrate your miter saw

What happens here

After unplugging the saw again, check the bevel angle. Lay a small square (e.g., a combination square or precision square) flat on the miter saw's table. Carefully slide the square until its edge makes contact with the flat side of the saw blade. Observe if there are any gaps between the square and the blade along their entire contact surface. If there are no gaps, the blade is at a perfect 90-degree bevel angle relative to the table. If a gap exists, the bevel needs adjustment.

Goal: Verify the saw blade is 90 degrees to the saw table.

Tools and materials

  • Miter Saw Ridgid — The saw being checked
  • Small Square — Measuring tool to check for 90-degree bevel angle

What they say

Hide

a cut. Once we have this, you can go ahead and take this side and flip it over. Press your bottoms tight and as you can tell, we have a gap. Next, we want to check our bevel. Grab yourself a smaller square, lay it on your table, slide it up against your blade. As you can see, there are no gaps. Whether it's a square or the board, if any of those tests fail, you know that your saw needs to be calibrated. Every saw adjusts differently, so check your user manual to figure out how to adjust your saw. In

Auto-generated from the video audio.