Stack Hexagonal Tiers and Attach Panels

What happens here

After the hexagonal tiers and panels have fully dried, remove all clamps and tape. Place two of the hexagonal tiers on a flat surface. Apply wood glue generously to the top edges of the bottom tier. Carefully stack the second hexagonal tier on top, aligning the edges as perfectly as possible. Repeat this process for the third tier, creating a stack of three hexagons. Apply wood glue to the top edge of the assembled hexagonal stack. Take the pre-glued panel intended for the top and place it over the opening. Trace the inner and outer hexagonal shape onto the panel using a pencil to ensure a perfect fit later. Repeat for the bottom panel, placing the assembled hexagonal structure onto it and tracing. Use F-clamps to apply light pressure to the stacked tiers, allowing the glue to set without deforming the structure. Remember to be gentle, as the structure is still somewhat fragile at this stage.

Goal: Assemble the tiered hexagonal body and prepare for cutting the top and bottom panels.