Skip to main content

Proper Saw Handling and Guiding

0:21
2:04
129.6K views

At 0:21 in

Circular saw basics

What happens here

Always hold the circular saw so that the wider part of its shoe (base plate) is fully supported on the material being cut. This provides better balance, stability, and control during the cut. For straight cross-cuts, use a speed square as a guide by aligning its edge firmly against the saw's shoe and pushing the saw along it.

Goal: Maintain control and achieve straight cuts.

Tools and materials

  • Circular Saw Milwaukee — The primary tool being used
  • Speed Square Unspecified — Guiding the saw for straight cross-cuts
  • Workpiece — The material being cut

What they say

Hide

hanging below it. Adjust your depth so the teeth extend roughly a quarter inch below your material and lock it in. And never pin this guard open. But even with the blade depth set correctly, how you hold the saw matters as well. Whenever possible, keep the wider part of the shoe supported for better balance and control. Keeping your saw stable doesn't guarantee a straight cut. For a straight crosscut, use your speed square as a guide. But there's one more thing you need to account for. And that's kerf. That's the material your blade removes when it makes a cut. So always cut on the waste side of your line. Before making your cut, bring your

Auto-generated from the video audio.