Skip to main content

Blade Selection and Changing

0:45
2:04
129.6K views

At 0:45 in

Circular saw basics

What happens here

Choose the correct blade for your task. A lower tooth count blade (e.g., 24T) cuts faster but leaves a rougher edge, ideal for dimensional lumber or rough framing. A higher tooth count blade (e.g., 60T) cuts slower but provides a cleaner finish, making it suitable for plywood, trim, or projects requiring a smooth edge. To change a blade, ensure the saw is unplugged (if corded) or the battery is removed (if cordless). Press the arbor lock button, use the provided wrench to loosen the arbor nut, remove the old blade, and install the new blade ensuring the rotation arrow on the blade matches the rotation arrow on the saw. Tighten the arbor nut securely.

Goal: Select and safely change the saw blade for optimal results.

Tools and materials

  • Arbor Wrench Typically included with saw — Loosening and tightening the arbor nut
  • Circular Saw Milwaukee — The tool for which the blade is being changed
  • High Tooth Count Blade — For cleaner cuts on plywood and finished materials
  • Low Tooth Count Blade — For fast, rough cuts on dimensional lumber
  • Safety Gloves Unspecified — Protecting hands from sharp blade teeth

What they say

Hide

The blade that you're using can make a difference as well. A lower tooth count blade like this one here cuts very fast, but leaves the cut very rough. A blade like this works very well for cutting your dimensional lumber. But a blade with more teeth like this one give you a cleaner finish, especially on plywood. Whenever you go to change a blade, make sure that it's installed in the correct direction. Notice this arrow going this way and this arrow going this way. It's also important to know that you have the correct arbor size and the right blade rated for the RPMs of your saw. Hold in your button and tighten down your blade. And cutting

Auto-generated from the video audio.