Skip to main content

Cutting Plywood Effectively

1:15
2:04
129.6K views

At 1:15 in

Circular saw basics

What happens here

Cutting plywood requires specific support to prevent sagging and blade pinching. Place sacrificial 2x4s or similar lumber underneath the plywood, ensuring support on both ends and along the cut line. This elevates the plywood and allows the blade to cut through without contacting your workbench or pinching. Mark your desired cut line, snap a chalk line for accuracy, and set your blade depth to cut through the plywood and slightly into the sacrificial wood below.

Goal: Achieve clean, stable cuts on plywood.

Tools and materials

  • Chalk Line Unspecified — Creating straight, visible cut lines on larger sheets
  • Circular Saw Milwaukee — Cutting the plywood
  • Measuring Tape Unspecified — Marking cut lines
  • Pencil Unspecified — Marking cut lines
  • Plywood N/A — The material being cut
  • Sacrificial 2x4s N/A — Supporting the plywood and allowing the blade to pass through

What they say

Hide

know that you have the correct arbor size and the right blade rated for the RPMs of your saw. Hold in your button and tighten down your blade. And cutting plywood presents its own set of challenges. Get some sacrificial 2x4s to support your plywood. And support it on both ends so the plywood doesn't sag and pinch your blade. Mark where you want to cut, chalk a line, set the depth of your blade. It's okay to cut into your sacrificial 2x4. Your saw also has a notch that lets you line up your blade with the line that you need to cut. Line up your notch, keep

Auto-generated from the video audio.