Skip to main content

Adjust Blade Depth

0:12
2:04
129.6K views

At 0:12 in

Circular saw basics

What happens here

Adjust the circular saw blade's depth so that the teeth extend roughly a quarter-inch below the material you are cutting. Locate the depth adjustment lever or knob on your saw, loosen it, set the blade to the desired minimal depth, and then re-lock it securely. This reduced blade exposure minimizes the risk of injury and reduces the strain on the saw.

Goal: Set the blade depth safely and efficiently.

Tools and materials

  • Circular Saw Milwaukee — The primary tool being adjusted
  • Workpiece — To gauge the correct blade depth

What they say

Hide

Before you use a circular saw, here's a few things you should know. If your wood closes around the blade, it can pinch it and throw the saw backwards. And that's why supporting your material is so important. But even with your wood supported, you don't need all this blade hanging below it. Adjust your depth so the teeth extend roughly a quarter inch below your material and lock it in. And never pin this guard open. But even with the blade depth set correctly, how you hold the saw matters as well. Whenever possible, keep the wider part of the shoe supported for better balance and control. Keeping your saw stable doesn't guarantee a straight cut. For a

Auto-generated from the video audio.