Skip to main content

Account for Kerf and Start Cut Correctly

0:30
2:04
129.6K views

At 0:30 in

Circular saw basics

What happens here

Understand that the saw blade removes a small amount of material as it cuts; this removed material is called 'kerf.' To ensure accuracy, always cut on the waste side of your pencil line. Before initiating the cut, bring the saw to full speed. Allow the blade to reach maximum RPM before it contacts the material, then let the blade do the work without forcing it through the wood.

Goal: Achieve accurate cuts by accounting for kerf and starting the saw at full speed.

Tools and materials

  • Circular Saw Milwaukee — Making the cut
  • Pencil Unspecified — Marking the cut line
  • Workpiece — The material being cut

What they say

Hide

and control. Keeping your saw stable doesn't guarantee a straight cut. For a straight crosscut, use your speed square as a guide. But there's one more thing you need to account for. And that's kerf. That's the material your blade removes when it makes a cut. So always cut on the waste side of your line. Before making your cut, bring your saw up to full speed and let the blade do the work. The blade that you're using can make a difference as well. A lower tooth count blade like this one here cuts very fast,

Auto-generated from the video audio.