Skip to main content
Stesso

Construct and Install Door Header

4:13
17:47
135.8K views

At 4:13 in

Building a Bonus Room + SOUNDPROOF WALLS || Concrete Slab House Reno (Ep.11)

Watch on YouTube

What happens here

For the large 8-foot wide door opening, a robust header is constructed. This involves sandwiching two 2x12 lumber pieces with half-inch spacers (scraps of wood or OSB/plywood). The spacers ensure the header matches the 3.5-inch width of standard 2x4 studs. The components are screwed together to create a strong, singular beam. This header is then carefully lifted and secured into the wall frame, supported by king and jack studs.

Tools and materials

  • 2x12 Lumber
  • Circular Saw
  • Clamps
  • Cordless Drill/Driver
  • Half-inch Spacers (wood scraps
  • OSB
  • plywood)
  • Ladders
  • Miter Saw
  • Wood Screws

What they say

Hide

[Music] i'm making the header for the header we're gonna sandwich two two by twelves plenty of load to carry here they are now here's a kicker dimensional lumber this is we call it a two by twelve but it's really one and a half when you stack one and a half and one and a half together it makes what three doing simple math today the problem is these studs are three and a half so we're missing an extra half an inch the way to counter that is when you typically build a header you put something between it it's just a spacing thing not a structural thing so you can use little scrap pieces of half-inch wood that you have or you can take a piece of osb plywood or whatever you got put it over screw it all together sandwich it you got a nice strong actually we've got to say bada-bing bada-boom we got a nice strong header

Auto-generated from the video audio.