Install Rebuilt Stem and Covers

get that on there nice, and get that in there kind of tight, put this on here, and since we had this like this, now I'll be able to show you that you can see that that, this will go back a little bit further, you can actually have that stem out a little bit, well, with an adjustable jaw on this thing, you can hook it right up, that little green crush washer, it sits down pretty nice, right, so you want to make sure that's a little snug, and we're definitely going to look and make sure there's no leaks, but get that put on there, get it nice and tight, and then I'm also going to go ahead, and we're going to give this packing a couple more turns, you can see that it's kind of loose, there we go, almost a full turn, probably about three quarters of a turn, now we're going to go ahead, we're going to turn the water back on, and we're going to hook this up, you probably could do this without draining this tub, we'll see how that works right there, we'll leave that shut off, and we'll leave these open, and you'll get some water coming out of here, all right, so now let's try this, see what we get, look at that, well that is way better than it was, yeah, look at that, yeah, minimal, we have got minimal drip coming out of there, for a three piece handle valve, I think that is pretty good, right, because these things, yeah, it actually looks like it's completely stopping, which this worked out really well, awesome, now with this, we just take it, reinstall, you can just screw that back in, screw that back on, before you put this back in, just take the screw, put the screw inside of it, that way it's not going to fall off, it's just going to be right in there, you got that hooked up, you're able just to screw that right back on, good to go, now, if only we could find the handle for this one as well,