Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 3 · Check the Impeller

Disconnect power to the pump. If possible based on your pump model, carefully remove the pump from the sump pit. Disassemble the pump housing to access the impeller. Check for any debris, such as gravel, roots, or rags, that may be caught in or around the impeller. Rotate the impeller manually to ensure it moves freely. Remove any obstructions. If the impeller is damaged, it will need to be replaced.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Check the Impeller

Disconnect power to the pump. If possible based on your pump model, carefully remove the pump from the sump pit. Disassemble the pump housing to access the impeller. Check for any debris, such as gravel, roots, or rags, that may be caught in or around the impeller. Rotate the impeller manually to ensure it moves freely. Remove any obstructions. If the impeller is damaged, it will need to be replaced.

Videos for this step

Test the Pump Motor and ImpellerInspect and Clean PumpClear Impeller Debris

Tools and Materials

← Project

Sump Pump Repair

Step 3 of 5·1.5 hr left

Verify Power Supply
10 minutes2 items
Inspect the Float Switch
15 minutes1 items
3
Check the Impeller
30 minutes3 items
4
Clear the Discharge Line
45 minutes3 items
5
Test the Sump Pump Operation
15 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.