Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 2 · Inspect the Float Switch

Carefully lift the float switch to simulate the water level rising. Listen for the pump to turn on. If the pump does not activate, check if the float switch is stuck or obstructed by debris. Ensure the float ball or tether can move freely. Clean any debris that may be preventing the switch from engaging. If the switch appears damaged or faulty, it may need to be replaced.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Inspect the Float Switch

Carefully lift the float switch to simulate the water level rising. Listen for the pump to turn on. If the pump does not activate, check if the float switch is stuck or obstructed by debris. Ensure the float ball or tether can move freely. Clean any debris that may be preventing the switch from engaging. If the switch appears damaged or faulty, it may need to be replaced.

Videos for this step

Check Water Level and Test Float SwitchDiagnosing the Float SwitchDiagnose the Stuck Float Switch

Tools and Materials

← Project

Sump Pump Repair

Step 2 of 5·1.8 hr left

Verify Power Supply
10 minutes2 items
2
Inspect the Float Switch
15 minutes1 items
3
Check the Impeller
30 minutes3 items
4
Clear the Discharge Line
45 minutes3 items
5
Test the Sump Pump Operation
15 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.