Skip to main content
Stesso

Erect Posts and Beam with Temporary Bracing

5:47
15:02
366.6K views

At 5:47 in

Why patio roofs fail - and how to build them right!

Watch on YouTube

What happens here

After preparing your posts and beam, install the posts by securing them to the previously installed post bases on the concrete footings. Once the posts are attached, temporarily brace them using additional lumber and nails, ensuring they are plumb (perfectly vertical) with a level. This temporary bracing is critical for stability. Next, carefully lift and set the main beam on top of the posts. This step illustrates the critical need for temporary bracing by showing a beam collapse when not properly supported, highlighting the importance of securing the structure before permanent connections.

Goal: Safely erect and temporarily stabilize the support posts and main beam.

Tools and materials

  • Impact driver Makita — Driving screws to attach posts to bases
  • Laminated beam — The main horizontal support for the rafters
  • Level — Ensuring posts are plumb
  • Lumber — The vertical support posts
  • Nail gun — Attaching temporary braces
  • Nails — Securing temporary braces
  • Post bases — Connecting the posts to the footings

What they say

Hide

Now I'll set my post and then I'll attach my post. And you could level and brace this post right now or you can set the beam so you can make some adjustment. If you have to lift a really big beam or you're worried about this moving, it's a good idea to run stakes. Before you go and nail it in, make sure your post is plumb. And now your post will stay plumb and set your beam. If we don't install braces, your beam could fall. Now this beam and your ledger will hold

Auto-generated from the video audio.