Cut Rafter Tails and Install Fascia Board

nail this on the end. Then I'll hook the chalk line and pull it down. Mark your rafter tails, and we'll chalk a line so we can cut all these rafter tails. I'll just set this up and put a rafter gauge on my square. Make sure this is level and then mark it. And we'll mark the rest of our tails. Depending on what handed saw you use and what hand you cut on depends if you want to mark it on this side or turn and mark it on this side. As you see here, the saw won't fit on this side, so these marks are pointless. And as you see here, you don't want to miss any. Attach your fascia. When you install fascia, you want to be sure it's in plane with your rafters. So you just lift your fascia up until it hits this mark, and then you can nail it in. If you have some twist in your lumber, you can make