Skip to main content
Stesso

Install Bubble Level

10:02
13:36
16K views

At 10:02 in

Werner Ladder Leveler Review | Best Levelers for Ladders

Watch on YouTube

What happens here

Locate the small bubble level provided in the kit. According to the instructions, this level should be installed in the center of the underside of the seventh rung from the base of the ladder. Align the bubble level with the grooves in the rung. Mark the locations for the screws, then use a drill with an 1/8-inch drill bit to drill pilot holes. Finally, secure the bubble level in place using the provided screws.

Goal: Attach the bubble level for accurate leveling reference.

Tools and materials

  • 1/8" Drill Bit — Drilling pilot holes for the bubble level screws
  • Bubble Level — Providing a visual indicator for ladder leveling
  • Drill Bosch — Drilling pilot holes for the bubble level screws
  • Ladder with Levelers Installed Werner — The ladder ready for the final accessory installation
  • Permanent Marker — Marking screw locations
  • Phillips Head Screwdriver — Securing the bubble level with screws
  • Screws — Securing the bubble level

What they say

Hide

bolts not hidden so they even give you a level of this thing to make sure everything's level so that's what that screw is I was wondering what that for seventh rung of Base one 2 3 4 5 6 7 seventh wrong of the base just go looks like it goes failure to install the Bubble Level correctly may result in an inaccurate setup of the ladder and may result in serious injury if your ladder is not level before climbing attach Bubble Level Place level in the center of the underneath of the seventh rung of the base aligning the Bubble Level with the grooves in the wrong and Mark drill locations using an e inch drill bed all right and will one where Third Base people running home levels

Auto-generated from the video audio.