Skip to main content
Stesso

Cut and Prepare Square Rod

4:48
13:36
16K views

At 4:48 in

Werner Ladder Leveler Review | Best Levelers for Ladders

Watch on YouTube

What happens here

Measure the internal width between the ladder rails. In the video, this measurement is 21 3/4 inches. Use a permanent marker to mark this length on the provided square rod. Then, use a hacksaw to carefully cut the square rod at the marked line. After cutting, use a rasp or file to smooth down any rough or sharp edges on the cut end of the rod to prevent injury and ensure a smooth fit.

Goal: Cut the square rod to the precise length of the ladder's internal width.

Tools and materials

  • Hacksaw Husky — Cutting the square rod to the measured length
  • Permanent Marker Sharpie — Marking the cut line on the square rod
  • Rasp/File — Smoothing the rough edges of the cut square rod
  • Square Rod Werner — Connecting the two leveler units
  • Tape Measure — Measuring the internal width of the ladder rails

What they say

Hide

[Music] one last check make sure cut it the right length 21 and 3/4 all right the next step in this

Auto-generated from the video audio.