Skip to main content
Stesso

Attach First Leveler and Mark Drill Holes

5:42
13:36
16K views

At 5:42 in

Werner Ladder Leveler Review | Best Levelers for Ladders

Watch on YouTube

What happens here

Extend the ladder out four rungs and lay it on its side, resting on a stable surface (like a table or sawhorses). Take one of the leveler units and the provided drill template. Position the template on one of the ladder rails, ensuring the bottom hole of the template aligns with the bottom rung of the ladder. Make sure the template is perfectly centered on the rail. Use a permanent marker to mark all six drilling locations through the template. Next, remove the rubber stopper from the top end of the leveler unit. Using the drill with the appropriate 1/4" and 1/8" drill bits, carefully drill the marked pilot holes.

Goal: Accurately mark and drill holes for the first leveler unit.

Tools and materials

  • 1/4" Drill Bit — Drilling larger holes as specified by the template
  • 1/8" Drill Bit — Drilling smaller holes as specified by the template
  • Drill Bosch — Drilling pilot holes for the leveler attachment
  • Drill Template — Guiding the precise placement of drill holes
  • Ladder Werner — The base for installing the leveler
  • Permanent Marker — Marking drill locations on the ladder rail
  • Werner Level Safe Pro Leveler Unit — The first leveler to be attached

What they say

Hide

wrench feet are removed extend up four rungs and rotate ladder onto its side r keeping the bottom hole in the drill tempet centered at the bottom run ensure the drill template centered L rail from top to bottom Mark all six locations on the rail [Music] using a/ Quin drill [Music] bit say remove the rubber stoppers move those template actually worked so holes lined up perfectly [Music]

Auto-generated from the video audio.