Drain and Replace Engine Oil and Filter

What happens here

The Doosan engine in the TYM tractor features conveniently located oil filler, dipstick, and oil filter for easy access. To drain the engine oil, locate the two oil drain plugs at the bottom of the U-shaped oil pan. It is crucial to remove both plugs to ensure all old oil is drained, as leaving one in can retain two to three quarts of old oil. After draining, replace the drain plugs. Remove the old engine oil filter. Before installing the new engine oil filter, apply a small amount of fresh engine oil to the rubber gasket to create a proper seal. Screw on the new filter by hand until it is snug. Finally, refill the engine with approximately four gallons of Delo 400 XSP 5W-40 Synthetic Heavy Duty Diesel Engine Oil through the oil filler cap.

Goal: Change engine oil and replace the engine oil filter.