Skip to main content
Stesso

Connect Wires with Solder & Seal Connectors

3:42
6:45
26K views

At 3:42 in

TIME TO GET A NEW ONE?...VACUUM CLEANER CORD REPAIR!

Watch on YouTube

What happens here

Take one of the prepared solder and seal connectors and slide it onto one of the stripped wires (e.g., the black wire). Match the corresponding stripped wire from the other end of the cord (the other black wire) and twist its copper strands together with the first wire's strands. Then, fold the twisted strands back onto themselves, creating a compact 'Y' shape. Repeat this process for the white wires. Ensure a good mechanical connection by twisting the strands tightly.

Goal: Mechanically connect the corresponding internal wires.

Tools and materials

  • Solder & Seal Connectors Spoby — Securing the twisted wire connections

What they say

Hide

let's start with the black one leave that right like that so we put the y into each other pinch both sides together and down and then twist in opposite directions all right and just fold it on to itself and just keep folding until it ends up looking like so slap that over that it's going to be good to rock and roll take this one same thing so once you get them together they're going to stay together like that just kind of pull them tight and start twisting them opposite directions get that rolling

Auto-generated from the video audio.