Single Detection Mode Demonstration

concrete partition Bo radar view so we'll go ahead and we'll um take it for a spin on dry concrete cuz it's been cured for more than a year and we're doing single detection and now we're trying to pick up this exactly this piece of rebound which is 7 in down yeah so you're going to see it marked it there 7 in down so right now the three lines are representing the left side here so you have a laser and an LED light if you're working in dark conditions if I want to Center that and mark it on the top I'll go ahead Center it mark it on the top or if I move it to the left I'll mark it to the right so we keep going and if you want to show that there yeah one there how deep is it oh it's fire it tell you how deep it is too it'll tell you on the screen it'll tell you on the left and it'll give you the measurement on the top oh right there it's telling me exactly that we got another piece and you can't hear it but right now it's audiable as well so it's alerting you audio oh okay so then we'll move it on along we're trying to pick up and then we'll pick up that one it's right 5 in we'll Center it up there we are and then we'll go all the way to the end we got plastic conduit at 4 in at 4 in how do you know it's plastic conduit by the it won't tell you what product it is it'll just tell you something in it'll tell you something okay so 4 in on that one was four and so we did a single detection mode there if we go back and we want to do a multi detection we'll go ahead and tape off three sections as we did now this size here three sections we'll go ahead and run it and our scanner will tell us to stop once we read the red point and that'll look something like this so it'll show you a multiple screen it'll show you three screens showing you the area that we just sced that's on M detction okay but I'm not seeing any of the stuff