Introduction to Moasure 2 Device

all right guys I've got Allan from moer and I'm going to tell you right now stop before you do another job estimate and check this out this is going to change the way you do your job estimates Alan how are you today very well thank you what are we looking at so this is the new MOA 2 device that we've just launched uh it measures in 2D and 3D and we're going to demonstrate how to do that I've got a section laid out right here you guys and this we're going to first Allen we're going to measure it for a patio as if I'm coming in I'm going to install a patio so I need this to be perfectly level I want my cut and fill to be perfectly level then I want to measure it for a pond so I want to do a 7ot excavation on this hole and I want to determine how much soil I'm going to have to actually export out and we can do that all with this device and a couple minutes of time without pulling out a la without pulling anything else out and it's going to actually generate not just a 2d but a 3D image so that I can not just bring that back to my office and do my measurements but I can show the customer in real time right there on the job site this is what we're doing and if you want to change your bid you want to change your estimate we got to tweak it here and we can do that all like right there your fingertips absolutely okay so first off let's measure for a paper patio so I want this to be this area perfectly flatten level I need to determine how much cut and how much fill I've got to do to make that happen Okay so how do we do that you'll going to do it okay so I'm just putting it in the stick all the stick does is make it so you don't to keep bending down okay so the first thing I have to